RD in Canada asked about replacement lens options available for his 007-60W light…

We manufacture several versions of this lens that you could install onto your light.  Each has its own benefits and trade-offs.  Here are your choices:

89-189 is a clear, acrylic lens.  Acrylic can break but is less apt to be harmed by chemicals.  It is also less likely to scratch or develop small environmental stress cracks (crazing). 

89-184A is the same part molded in amber.

89-184PC is a clear lens molded of Lexan (polycarbonate)  This is the version of the lens that many OEMs have been buying most recently.  It is very difficult or impossible to break, but is more likely to scratch or develop crazing from UV exposure.  It is also easier to damage this lens with harsh chemical cleaning agents.  But for OEMs using air guns for installation, this lens is hard to damage.

Pricing is the same for any of these.

Personally, I would go with one of the acrylic lenses.  Since you would be  installing this by hand with a screw driver I would not expect you to have problems.  If you feel that breakage is a concern, then you might consider the PC lens.

If you'd like to order these, just call our order entry department at 269-679-4011 and give them the part number that you need.